Chapter 7 Running The Demonstration Programs; Accessing The Demo Programs Screen - Tandberg Data MSERIES USER User Manual

Chapter 7
Running the Demonstration
Programs

Accessing the Demo Programs Screen

The M-Series libraries provide several built-in demonstration programs
and a confidence test you can use to check whether the robotics are
functioning properly. You can access these programs through the
screen.
Programs
Do not use backup tapes to run these programs. These
Caution:
programs move cartridges around the library; the
cartridges will not be in the same position when the
program ends.
To access the
Demo Programs
1 On the main screen, press
The GUI displays the
2 Press .
Demo
The GUI displays the
Tandberg Data M-Series User's Guide
screen:
.
Menu
screen.
Menu
screen (see
Demo Programs
7
Demo
figure 60).
7
91