Tandberg Data MSERIES USER User Manual page 183

Notice for USA and CANADA Only
Laser Statement
Class 1 Laser
4
Product
Library Battery Statement
4
Caution
If shipped to USA, use the UL LISTED power cord specified below for
100-120 V operation. If shipped to Canada, use the CSA CERTIFIED
power cord specified below for 100-120V operation.
Plug Cap Parallel blade with ground pin (NEMA 5-15P
configuration)
Cord Type: SJT, three 16 AWG (1.5 mm
18 AWG (1.0 mm
Length Maximum 15 feet (4.5m)
Rating Minimum 10 A, 125 V
CAUTION: With all panels and enclosures in place, this product is rated
as a Class I laser product. The bar code scanner inside this product,
however, is a Class II laser. Avoid exposure to the laser light emitted from
the bar code scanner. Do not stare into the beam.
CAUTION: Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous exposure.
This product contains a Lithium battery. The nonvolatile RAM, Dallas
Semiconductor DS1743-100, contains a Lithium battery. Lithium may be
considered a hazardous material. Dispose of this battery in accordance
with local, state, and federal laws.
Tandberg Data M-Series User's Guide
Appendix D Regulatory Statements
2
) or
2
) wires
4
4
4
167