Table 5 Import/Export Settings - Tandberg Data MSERIES USER User Manual

Table 5 Import/Export
Settings
Table 5 describes each of the possible settings for the
option.
Import/Export
Setting Description
When manual access port (
MAP
use the first slot in the top left magazine to import
and export cartridges from the library. The host
views the MAP as a storage element; therefore, after
using the MAP to import a cartridge, you must
replace the data cartridge that was originally stored
there.
For information about importing and exporting
cartridges when
Cartridge in MAP Mode
Cartridge in MAP Mode
(or When this setting is selected, all slots in the top left
10-Slot
in LTO magazine are configured as import/export elements.
12-Slot
libraries) They cannot be used for storage.
For more information about importing and exporting
cartridges when
Importing Cartridges in 10-Slot or 12-Slot Mode
page 32 and
12-Slot Mode
When this setting is selected, the first slot in the top
1-Slot
left magazine is configured as an import/export
element. It cannot be used for storage.
For more information about importing and exporting
cartridges when
Cartridge in 1-Slot Mode
Cartridge in 1-Slot Mode
When this setting is selected, the top left magazine is
None
used as a 10- or 12-cartridge storage element and
behaves in exactly the same way as the other
magazines.
Tandberg Data M-Series User's Guide
Chapter 3 Changing the Library Configuration
Changing the Import/Export Setting
) is selected, you can
MAP
is selected, see
MAP
on page 30 and
on page 31.
(or ) is selected, see
10-Slot 12-Slot
Exporting Cartridges in 10-Slot or
on page 33.
is selected, see
1-Slot
on page 33 and
on page 34.
Import/Export
Importing a
Exporting a
on
Importing a
Exporting a
63