Changing The Ignore Host Lock Setting - Tandberg Data MSERIES USER User Manual

Changing the Ignore Host Lock Setting

To return to the
Configuration
setting, press
Cancel
6 Press to return to the main screen.
Main
This setting takes effect when you reboot the library.
Note:
The
Ignore Host Lock
mailbox when the host has issued a SCSI command to lock the media:
• Enabling this option allows you to release the mailbox even when the
host has issued a SCSI command to lock the media.
• Disabling this option causes the library to display an error message
when you try to release the mailbox when the host has locked the
media.
To change the
Ignore Host Lock
1 Access the
Configuration
Screen on page 49).
2 Press the or
Up Down
3 Press .
Select
4 Use the or
Up Down
setting. The available settings are
5 Press .
Select
To return to the
Configuration
setting, press
Cancel
6 Press to return to the main screen.
Main
This setting takes effect when you reboot the library.
Note:
Tandberg Data M-Series User's Guide
Chapter 3 Changing the Library Configuration
Changing the Ignore Host Lock Setting
screen without changing the option
.
option controls whether the library can release the
setting:
screen (see Accessing the Configuration
buttons until
Ignore Host Lock
buttons to select the desired
Enabled
screen without changing the option
.
is highlighted.
Ignore Host Lock
or (default).
Disabled
3
65