Configuring The Mailbox; Removing The Magazines - Tandberg Data MSERIES USER User Manual

Configuring the
2
Mailbox

Removing the Magazines

By default, the
Import/Export
1 On the main screen, press
The GUI displays the
2 On the screen, press
Mailbox
The GUI displays the
option highlighted.
3 Use the and
Up Down
setting. The available settings are
LTO libraries), and
For more information about these settings, see
Note:
the Import/Export Setting
4 Press .
Select
5 Press to return to the main screen.
Main
This setting takes effect when you reboot the library.
Note:
To remove a magazine from an M1500 library, see
from an M1500.
To remove a magazine from an M2500 library, see
from an M2500.
Tandberg Data M-Series User's Guide
option is set to
MAP
.
Mailbox
screen (see
Mailbox
.
Config
screen, with the
Configuration
buttons to select the desired Import/Export
,
None 1-Slot
(default).
MAP
on page 62.
Chapter 2 Basic Operations
Removing the Magazines
. To change this setting:
figure 22).
Import/Export
, (or
10-Slot 12-Slot
Changing
Removing a Magazine
Removing a Magazine
in
2
35