Figure 59 Select Tape Drive Screen - Tandberg Data MSERIES USER User Manual

Chapter 6 Updating Drive Firmware
Updating the Drive Firmware from Tape
Figure 59 Select Tape
Drive Screen
90
Tandberg Data
7 If the library is an M1500 in a multiple library stack or an M2500,
press the button to select the level where the drive that requires
Level
updating is located.
8 Press or
Drive 1 Drive 2
To cancel the operation, press
9 Press .
Select
The GUI displays the message
is done, the GUI displays the message
any button to continue.
10 Press any button.
The GUI displays the
11 Press to return to the
Back
Tandberg Data M-Series User's Guide
.
.
Cancel
Update in progress
Drive update complete. Press
Select Firmware Cartridge
screen.
Service Drive
. When the update
screen.