Verifying Ivr Configuration Using The Cli - Cisco 9134 - MDS Multilayer Fabric Switch Troubleshooting Manual

Initial Troubleshooting Checklist
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Choose Fabricxx > All VSANs > IVR to verify your IVR configuration.
Step 1
Select the CFS tab to verify that the Oper column is enabled and the Global column is enabled for CFS
Step 2
distribution. Check the LastResult column for the status of the last CFS action.
Select the Action tab to determine if auto topology and IVR NAT are enabled.
Step 3
Select the Local Topology and Active Topology tabs to verify your IVR VSAN topology.
Step 4
Choose Fabricxx > All VSANs > Domain Manager to verify unique domain IDs if IVR NAT is not
Step 5
enabled.
Choose Zone > IVR > Edit Local Full Zone Database to verify your IVR zones and zone sets and to
Step 6
verify that you have activated your IVR zone set. The active IVR zone set name appears in bold.

Verifying IVR Configuration Using the CLI

Several commands involving multiple configuration tasks can be used to verify the IVR configuration.
Table 13-1
CLI Command
show fcdomain
domain-list
show interface brief
show fcns database
show zoneset active
show ivr fcdomain
show ivr internal
show ivr pending-diff
show ivr service-group
show ivr tech-support
show ivr virtual-domains Shows IVR virtual domains for all local VSANs.
show ivr
virtual-fcdomain-add-st
atus
show ivr vsan-topology
show ivr zoneset
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
13-4
CLI Commands for Verification of IVR
Description
Verifies unique domain ID assignment. If a domain overlap exists,
edit and verify the allowed-domains list or manually configure static,
non-overlapping domains for each participating switch and VSAN.
Verifies if the ports are operational, VSAN membership, and other
configuration settings covered previously.
Verifies the name server registration for all devices participating in
the IVR.
Displays zones in the active zone set. This should include configured
IVR zones.
Displays the IVR persistent fcdomain database.
Shows the IVR internal troubleshooting information.
Shows the IVR pending configuration.
Shows the difference between the IVR pending and configured
databases.
Shows information that is used by your customer support
representative to troubleshoot IVR issues.
Shows IVR virtual fcdomain status.
Verifies the configured IVR topology.
Verifies the IVR zone set configuration.
Chapter 13 Troubleshooting IVR
OL-9285-05