Resolving Database Size Issues - Cisco 9134 - MDS Multilayer Fabric Switch Troubleshooting Manual

Validation and Commit Failure Issues
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Check ivr status.
Example 15-11 show device-alias Command Output
switch-2# show device-alias internal validation-info
Validation timer:
Per SAP Info Table:
===================
SAPS:
SAP:
SAP:
MTS Buffer Array Details:
=========================
Buffers:
Local Status:
=============
Num Reqs Sent:
Num SAPs Done:
Failed SAP
handling other requests. Please retry the command after some time.
Expln: there is a pending action. Check ivr status
Remote Status:
==============
CFS Resp Rcvd: FALSE
Failed SWWN
The failed SAP in
device alias database changes.

Resolving Database Size Issues

The maximum size of the device alias database increased from 8K to 20K for switches running SAN-OS
Release 3.1(1) or later. If the fabric includes switches running SAN-OS Release 3.0(x) or earlier and
switches running Release 3.1(1) or later, the maximum size of the device alias database is limited to 8K.
This is the limit imposed on the switches running Release 3.0(x) or earlier. Unless all of the switches are
upgraded to Release 3.1(1) or later, you cannot configure more than 8K device aliases.
If you attempt to configure or commit a device alias database that exceeds the maximum size supported
in the fabric, the configuration or the commit will fail.
Example 15-13
Example 15-12 Commit Failure Due to Database Size Limits
switch-1(config)# device-alias commit
Some of the switches in the fabric are running a version of software which
cannot support either the issued command or maximum device-alias limits.
Please fix those switches and retry the command.
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
15-14
0s
2
18 Num Resp Rcvd:
110 Num Resp Rcvd:
0
1
2
: 110 Status: Some of the registered modules are busy ==>Status and reason
: 00:00:00:00:00:00:00:00
SAP : 0 Status: success
Example 15-11
shows the configuration failure.
Chapter 15
1
1
Expln:
is 110 (IVR). Unless the IVR lock is released, you cannot commit the
Example 15-12
Troubleshooting Distributed Device Alias Services
shows the commit failure and
OL-9285-05