Cisco 9134 - MDS Multilayer Fabric Switch Troubleshooting Manual page 192

Common Problems with Port Interfaces
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Feb 17 04:42:54 fcns: vsan 99: Trying to send RSCN; affected port 780200
Feb 17 04:42:54 fcns: vsan 99: rscn timer started for port 780200
Feb 17 04:42:54 fcns: vsan 99: Saving new entry into pss
Feb 17 04:42:54 fcns: vsan 99: Sending sync message to the standby
Feb 17 04:42:54 fcns: vsan 99: sending accept response to 780200
/* RSCN was received by N/NL port */
Feb 17 04:42:54 fcns: vsan 99: sending accept response to fffc61
/* Other switch in fabric is notified */
Feb 17 04:42:55 fcns: vsan 99: rscn timer expired for port 780200
Feb 17 04:42:55 fcns: vsan 99: Saving modified entry into pss
Feb 17 04:42:55 fcns: vsan 99: Sending sync message to the standby
Feb 17 04:42:55 fcns: vsan 99: Registered fc4-types for port-id 780200
Feb 17 04:42:55 fcns: vsan 99: Registered fc4-features for fc4_type 8 for port-id 780200
/* FC4 Type, type 8 FCP has been registered */
Additional lines similar to these will be listed if more name server objects are registered.
If you are managing the switch over a Telnet connection, enable terminal monitoring by entering the
Step 7
terminal monitor command in exec mode.
The system output looks like this:
switch# show fcns database detail vsan 99
------------------------
VSAN:99
------------------------
port-wwn (vendor)
node-wwn
class
node-ip-addr
ipa
fc4-types:fc4_features:scsi-fcp:init
initiator */
symbolic-port-name
symbolic-node-name
port-type
port-ip-addr
fabric-port-wwn
hard-addr
Other attribute objects of the Nx port are registered one per register operation after the FLOGI process
is complete. The Nx port performs PLOGI to the well-known WWN of the Name Server, 0xFFFFFC.
The FC_CT Common Transport protocol uses Request and Accept messages to conduct transactions. To
verify that additional attributes are correctly registered and recorded in the database, you can use the
SAN-OS debug facility.
The command show fcns database detail vsan X displays a detailed list of all devices registered in the
Note
fabric.
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
8-20
FCID:0x780200
:21:00:00:e0:8b:07:a4:36 (QLogic) /* Port world wide name */
:20:00:00:e0:8b:07:a4:36
:3
:0.0.0.0
:ff ff ff ff ff ff ff ff
:
:
:N
:0.0.0.0
:20:8e:00:05:30:00:86:9e /* wwn of the switch port */
:0x000000
Chapter 8
/* Fibrechannel class of service */
/* IP Address */
/* Registered FC4 Types: example SCSI and
/* Fibrechannel port type (F,FL) */
Troubleshooting Ports
OL-9285-05