Cfs Distribution Of Domain Id List Fails - Cisco 9134 - MDS Multilayer Fabric Switch Troubleshooting Manual

Domain Issues
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
If you have the rcf-reject option enabled, use the interface command and then the no fcdomain rcf-reject
Step 4
vsan command in interface mode.
Step 5 Use the fcdomain auto-reconfigure vsan command in the EXEC mode on both switches to enable
auto-reconfiguration after a Domain Manager restart.
Step 6 Use the fcdomain restart disruptive vsan command to restart the Domain Manager.

CFS Distribution of Domain ID List Fails

Symptom
Table 11-14 CFS Distribution of Domain ID List Fails
Symptom Possible Cause
CFS distribution of Configured domain ID in remote switch
domain ID list fails. not present in domain ID list.
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
11-22
CFS distribution of domain ID list fails.
Chapter 11 Troubleshooting VSANs, Domains, and FSPF
Solution
Add all domain IDs in the VSAN to the domain ID list.
Choose Fabricxx > VSANxx > Domain Manager >
Allowed and select the Allowed DomainIDs tab to view
the current allowed domain ID list in Fabric Manager.
Choose Fabricxx > VSANxx > Domain Manager and
select the Configuration tab to view the existing domain
IDs for this VSAN. Choose Fabricxx > VSANxx >
Domain Manager > Allowed and select the Allowed
DomainIDs tab to add any missing domain IDs, and then
click Apply Changes. If CFS is enabled, select the CFS
tab and select commit from the ConfigAction drop-down
menu and click Apply Changes.
Or use the show fcdomain domain-list to view the current
allowed domain ID list. Compare this to any other switches
in the VSAN to determine what domain IDs are missing.
Use the fcdomain allowed CLI command to add any
missing domain IDs.
OL-9285-05