Troubleshooting Zone Activation Using The Cli - Cisco 9134 - MDS Multilayer Fabric Switch Troubleshooting Manual

Mds 9000 family
Hide thumbs Also See for 9134 - MDS Multilayer Fabric Switch:
Table of Contents

Advertisement

Zone and Zone Set Issues
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Troubleshooting Zone Activation Using the CLI

To verify the active zone set and active zones using the CLI, follow these steps:
Step 1
Use the show zone analysis active vsan vsan-id command to analyze the active zone set database. Verify
that the formatted size does not exceed the 2048 KB limit shown. If it exceeds the limit, you must remove
some zones or devices within a zone.
switch# show zone analysis active vsan 1
Zoning database analysis vsan 1
Active zoneset: zs1 [*]
Use the show zone analysis vsan vsan-id command to analyze the full zone set database. Verify that the
Step 2
formatted size does not exceed the 2048 KB limit shown. If it exceeds the limit, you must remove some
zones or devices within a zone.
switch# show zone analysis vsan 1
Zoning database analysis vsan 1
Full zoning database
Last updated at: 15:57:10 IST Feb 20 2006
Last updated by: Local [ CLI ]
Num zonesets: 1
Num zones: 1
Num aliases: 0
Num attribute groups: 0
Formattted size: 36 bytes / 2048 Kb
Unassigned Zones: 1
zone name z1 vsan 1
Use the show zoneset active vsan-id command to display the active zones.
Step 3
switchA# show zoneset active vsan 2
zoneset name ZoneSet1 vsan 2
zone name NewZoneName vsan 2
Verify that the needed zones are active.
Step 4
Optionally, use the zoneset name ActiveZonesetName vsan-id command and the member NewZone
Step 5
command to add the zone to the active zone set in the VSAN.
switch(config)# zoneset name ZoneSet1 vsan 2
switch(config-zoneset)# member NewZoneAdded
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
14-10
Activated at: 08:03:35 UTC Nov 17 2005
Activated by: Local [ GS ]
Default zone policy: Deny
Number of devices zoned in vsan: 0/2 (Unzoned: 2)
Number of zone members resolved: 0/2 (Unresolved: 2)
Num zones: 1
Number of IVR zones: 0
Number of IPS zones: 0
Formattted size: 38 bytes / 2048 Kb
* pwwn 22:35:00:0c:85:e9:d2:c2
* pwwn 10:00:00:00:c9:32:8b:a8
Chapter 14
Troubleshooting Zones and Zone Sets
OL-9285-05

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents