Verification Of Switch Connectivity; Verifying Switch Connectivity Using Fabric Manager; Verifying Switch Connectivity Using The Cli - Cisco 9134 - MDS Multilayer Fabric Switch Troubleshooting Manual

Chapter 20 Troubleshooting IP Storage Services
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Verification of Switch Connectivity

Use the procedures in this section to verify connectivity to a destination switch.
The FC ID variable used in these procedures is the domain controller address; it is not a duplication of
Note
the domain ID.

Verifying Switch Connectivity Using Fabric Manager

To verify connectivity to a destination switch using Fabric Manager, follow these steps:
Choose Fabricxx > VSANxx > Domain Manager to display the domain ID for the destination switch.
Step 1
Concatenate the domain ID with FFFC to obtain the domain controller address. For example, if the
Step 2
domain ID is 0xda(218), the concatenated ID is 0xfffcda.
Choose Tools > Ping... to verify reachability to the destination switch.
Step 3

Verifying Switch Connectivity Using the CLI

To verify connectivity to a destination switch using the CLI, follow these steps:
Use the show fcdomain domain-list vsan command to display the domain ID for the destination switch.
Step 1
switch# show fcdomain domain-list vsan 200
Number of domains: 7
Domain ID
---------
0x01(1)
0x02(2)
0x6f(111)
0xda(218)
0x06(6)
0x04(4)
0x6a(106)
Concatenate the domain ID with FFFC to obtain the domain controller address. For example, if the
Step 2
domain ID is 0xda(218), the concatenated ID is 0xfffcda.
OL-9285-05
WWN
-----------------------
20:c8:00:05:30:00:59:df [Principal]
20:c8:00:0b:5f:d5:9f:c1
20:c8:00:05:30:00:60:df
20:c8:00:05:30:00:87:9f [Local]
20:c8:00:0b:46:79:f2:41
20:c8:00:05:30:00:86:5f
20:c8:00:05:30:00:f8:e3
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
IP Issues
20-7