Border Switch Fails - Cisco 9134 - MDS Multilayer Fabric Switch Troubleshooting Manual

IVR Issues
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Border Switch Fails

If an IVR-enabled switch fails, you must update the IVR topology to reflect this change if you are not
using auto topology.
Symptom
Table 13-7 Border Switch Fails
Symptom Possible Causes
Border switch fails. IVR topology incorrect.
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
13-10
Border switch fails.
Solutions
Choose Fabricxx > All VSANs > IVR and select the
Action tab in Fabric Manager. Check the Auto Discover
Topology check box and click Apply Changes. Select the
CFS tab and set ConfigAction to commit and click Apply
Changes.
Or use the ivr vsan topology auto CLI command to
automatically reconfigure the IVR topology, or use the ivr
vsan topology database CLI command to manually
reconfigure the IVR topology.
Chapter 13 Troubleshooting IVR
OL-9285-05