Installing And Configuring The Webaccess Application On Your Web Server - Novell GROUPWISE 7 - INTEROPERABILITY GUIDE Manual

Verifying WebAccess Agent Object Properties
During installation of the WebAccess Agent, the WebAccess Agent object should have been
configured correctly. However, it can be helpful to verify certain cluster-specific information in
order to familiarize yourself with the configuration of a clustered WebAccess Agent.
"Accessing WebAccess Agent Object Properties" on page 355
"Verifying Post Office Links" on page 355
"Forcing Use of the Web Access Agent Secondary IP Address" on page 355
Accessing WebAccess Agent Object Properties
1 In ConsoleOne, browse to and select the WebAccess Agent domain in order to display its
contents.
2 Right-click the WebAccess Agent object, then click Properties.
3 Continue with
Verifying Post Office
Verifying Post Office Links
In the WebAccess object property page:
1 Click Post Office Links.
2 Verify that the Access Mode column displays C/S (for client/server mode) for all post offices
serviced by the WebAccess Agent.
3 Verify that the Links column displays the secondary IP addresses of the cluster resource group
where post offices reside, not the IP addresses of any nodes in the cluster.
4 Make changes if necessary.
5 Continue with Forcing Use of the Web Access Agent Secondary IP
Forcing Use of the Web Access Agent Secondary IP Address
If you want the WebAccess Agent to always use its secondary IP address, rather than using the
primary IP address:
1 In ConsoleOne, click GroupWise > Network Address.
2 In the TCP/IP Address field, provide the secondary IP address
Worksheet item 8) for the WebAccess Agent.
3 Select Bind Exclusively to TCP/IP Address.
4 Click OK.
5 Continue with Installing and Configuring the WebAccess Application on Your Web
34.3.5 Installing and Configuring the WebAccess Application
on Your Web Server
The WebAccess Application cannot be installed in a cluster. Follow the standard installation and
configuration instructions in
WebPublisher Application" in
Guide.
Links.
"Installing and Configuring the WebAccess Application and
"Installing GroupWise
Address.
(WebAccess Agent Clustering
WebAccess" in the GroupWise 7 Installation
Implementing WebAccess in a Heartbeat Cluster 355
Server.