Script Commands - Dell PowerVault MD3000i Cli Manual

Script Commands

This chapter describes the script commands used to configure, monitor, and
maintain a storage array. This chapter is organized in four sections:
• "Command Formatting Rules" on page 106 lists general formatting rules
that apply to the command syntax.
• "Commands Listed by Function" on page 108 lists the commands by
functional activity:
– Disk group
– Enclosure
– Host topology
– Physical disk
– Redundant array of independent disks (RAID) controller module
– Session
– Show string
– Snapshot
– Storage array
– Virtual disk
– Virtual disk copy
• "Commands Listed Alphabetically" on page 114 lists the commands
alphabetically and, for each command, includes command name, syntax,
and parameters.
NOTICE:
Commands entered using the command line interface (CLI) are capable of
damaging a configuration and causing loss of data if not used properly. Command
operations are performed as soon as you run the commands. Some commands can
immediately delete configurations or data. Before using the command line
interface, make sure you have backed up all data, and save the current
configuration so that you can reinstall it if the changes you make do not work.
Script Commands
105