Dell PowerVault MD3000i Cli Manual page 33

Table 2-3. General Form of the Script Commands (continued)
Command Syntax
deactivate object
{statement-data}
delete object
diagnose object
{statement-data}
disable object
{statement-data}
download object
{statement-data}
enable object
{statement-data}
recopy object
{statement-data}
recover object
{statement-data}
recreate object
{statement-data}
remove object
{statement-data}
repair object {statement-data} Repairs errors found by the check command.
reset object {statement-data} Returns the hardware or object to an initial state.
resume object
revive object
save object {statement-data}
set object {statement-data}
Description
Removes the environment for an operation.
Deletes a previously created object.
Runs a test and displays the results.
Prevents a feature from operating.
Transfers data to the storage array or hardware
associated with the storage array.
Allows a feature to operate.
Restarts a virtual disk copy operation by using an
existing virtual disk copy pair. You can change
attributes before the operation is restarted.
Re-creates an object from saved configuration data
and the statement attributes (similar to the create
command.)
Restarts a snapshot operation using an existing
snapshot virtual disk. You can change attributes
before the operation is restarted.
Removes a relationship from between objects.
Starts a suspended operation. The operation begins
where it left off when suspended.
Forces the object from the Failed to the Optimal
state. Use only as part of an error recovery procedure.
Writes information about the object to a file.
Changes object attributes. All changes are completed
when the command returns.
About the Script Commands
33