Set Storage Array Isns Server Ipv6 Address - Dell PowerVault MD3000i Cli Manual

Parameters
Parameter
isnsIPV4Configuration Method The method that you want to use to
isnsIPV4Address
NOTE:
The DHCP server passes configuration parameters, such as network
addresses, to IP nodes. DHCP enables a client to acquire all of the IP configuration
parameters that it needs to operate. DHCP enables you to automatically allocate
reusable network addresses.
Example
-c "set storageArray isnsIPV4ConfigurationMethod =
static isnsIPV4Address = 192.168.0.1;"

Set Storage Array iSNS Server IPv6 Address

This command sets the address for an IPv6 Internet Storage Name Service
(iSNS).
Syntax
set storageArray isnsIPV6Address= ipv6-address
186
Script Commands
Description
define the iSNS server configuration. You
can enter the IP address for the IPv4 iSNS
servers by selecting static. For IPv4,
you can choose to have a Dynamic Host
Configuration Protocol (DHCP) server
select the iSNS server IP address by
entering dhcp. To enable DCHP , you
must set the isnsIPV4Address IP
address to 0.0.0.0.
The IP address that you want to use for
the iSNS server. Use this parameter with
the static argument for IPv4
configurations. If you choose to have a
DHCP server set the IP address for an
IPv4 IP iSNS server, you must set the
isnsIPV4Address IP address to
0.0.0.0.