About The Command Line Interface - Dell PowerVault MD3000i Cli Manual

About the Command Line Interface

This guide is intended for system administrators, developers, and engineers
who need to use the command line interface (CLI) tool and its associated
commands and script files. Selected CLI commands perform functions that
you can also access from the Modular Disk (MD) Storage Manager, which is
the graphical user interface (GUI) to the storage array. See the User's Guide,
which describes the Storage Manager software that is used to create and manage
multiple storage arrays. For additional information, see the hardware and
software manuals that shipped with your system.
NOTE:
Always check for updates on support.dell.com and read the updates first
because they often supersede information in other documents.
NOTE:
CLI commands do not have interactive warnings for destructive commands.
The command line interface (CLI) is a software tool that enables storage
array installers, developers, and engineers to configure and monitor storage
arrays. Using the command line interface, you can issue commands from an
operating system prompt, such as the Microsoft
prompt (C:\) or a Linux operating system terminal.
Each command performs a specific action for managing a storage array or
returning information about the status of a storage array. You can enter
individual commands, or run script files when you need to perform operations
more than once (such as installing the same configuration on several storage
arrays). A script file can be loaded and run from the command line interface.
You can also run commands in an interactive mode. Interactive mode enables
you to connect to a specific storage array and rapidly enter a command,
determine the effect on the storage array, and then enter a new command.
The command line interface gives you direct access to a script engine utility
in the Dell™ PowerVault™ Modular Disk Storage Manager software (MD
Storage Manager). The script engine reads the commands, or runs a script
file, from the command line and performs the operations instructed by the
commands.
®
Windows
About the Command Line Interface
®
command
13