Monitoring Performance - Dell PowerVault MD3000i Cli Manual

Monitoring Performance

Monitor the performance of a storage array by using the save storageArray
performanceStats command. This command saves performance information
to a file that you can review to determine how well the storage array is
running. Table 6-1 lists the performance information saved to the file.
Table 6-1. Storage Array Performance Information
Type of Information
Devices
Total I/Os
Read Percentage
Cache Hit Percentage Percentage of reads that are fulfilled by data from the cache
Current KB/second
Maximum KB/second Highest data transfer value achieved in the current
Current IO/second
Maximum IO/second Highest number of I/Os achieved in the current
96
Maintaining a Storage Array
Description
Devices are:
• RAID Controller Modules — The RAID controller module
in slot 0 or 1 and a list of the virtual disks owned by the
RAID controller module
• Virtual Disk — A list of the virtual disk names
• Storage Array Totals — A list of the totals for both RAID
controller modules in an active-active RAID controller
module pair, regardless if one, both, or neither are selected
for monitoring
Number of total I/Os performed since the storage array was
started
Percentage of total I/Os that are read operations (calculate
the write percentage by subtracting the read percentage from
100 percent)
rather than requiring an actual read from a physical disk
Current transfer rate in kilobytes per second (current means
the number of kilobytes per second since the last time the
polling interval elapsed, causing an update to occur)
kilobyte-per-second statistic block
Current number of I/Os per second (current means the
number of I/Os per second since the last time the polling
interval elapsed, causing an update to occur)
I/O-per-second statistic block