Parameter Description
file
The name of the file to which you want to save the performance statistics.
Enclose the file name in double quotation marks (" ").
NOTE:
If you have not reset the iSCSI baseline statistics since the RAID controller
module start-of-day, the time at the start-of-day is the default baseline time.
NOTE:
This command does not automatically append a file extension to the new
file. You must specify the file extension when you enter the file name.
Example
-c "save storageArray iscsiStatistics [raw] file =
\"testfile\";"
Save Storage Array Performance Statistics
This command saves the performance statistics to a file. Before you use this
command, issue the set session performanceMonitorInterval and set session
performanceMonitorIterations commands to specify how often statistics are
collected.
Syntax
save storageArray performanceStats file=" filename "
Parameters
Parameter
file
Save Storage Array SAS PHY Counts
This command saves the storage array SAS PHY counters to a file.
Syntax
save storageArray SASPHYCounts file=" filename "
Description
Name of the file to which to save the performance
statistics. You must put quotation marks (" ") around
the file name.
Script Commands
165