Ipmi Shell Commands - Dell External OEMR 1435 User Manual

IPMI Shell Commands

Table 3-1 lists IPMI Shell commands with a brief description.
NOTE:
The sol, sensor, and connect commands can be used in the IPMI Shell
interactive and non-interactive modes and the quit command can be used only in
the interactive mode.
Table 3-1. IPMI Shell Commands
Command
identify
sysinfo
power
sel
sol
sensor
lcd
powermonitor
connect
help
quit
identify
Synopsis
identify [on [-t seconds ] | off]
Description
This command controls the identification LED on the front panel. See
Figure 3-6.
64
Using the BMC Management Utility
Description
Controls the identification LED on the front panel.
Retrieves and displays managed system information.
Controls the power state of the managed system.
Displays or deletes information from the SEL.
Enables Serial-over-LAN for the remote managed system.
Displays current status of platform sensors.
Displays information on and helps configure the LCD panel in
Dell x xx and xx
9 0
Displays information on and helps manage your system's power.
Connects to the BMC of the remote managed system.
displays a command list with descriptions and syntax of options.
exits the command prompt.
x systems
.