A Subset Of Useful Cli Commands - Dell Powerconnect W-ClearPass Hardware Appliances Quick Start Manual

Enter Secondary DNS: 192.168.5.1
4. Change your password.
Use any string of at least six characters:
New Password:************
Confirm Password:************
Going forward, you will use this password for cluster administration and management of the appliance.
5. Change system date/time.
Do you want to configure system date time information [y|n]: y
Please select the date time configuration options.
1) Set date time manually
2) Set date time by configuring NTP servers
Enter the option or press any key to quit: 2
Enter Primary NTP Server: pool.ntp.org
Enter Secondary NTP Server: time.nist.gov
Do you want to configure the timezone? [y|n]: y
Once the timezone information is entered, you are asked to confirm the selection.
6. Commit or restart the configuration.
Follow the prompts:
y[Y] to continue
n[N] to start over again
q[Q] to quit
Enter the choice: Y
Successfully configured Policy Manager appliance
**************************************************************
* Initial configuration is complete.
* Use the new login password to login to the CLI.
* Exiting the CLI session in 2 minutes. Press any key to exit now.

A Subset of Useful CLI Commands

The CLI provides a way to manage and configure Policy Manager information. Refer to Appendix A: Command Line
Interface in the User Guide for more detailed information on the CLI.
The CLI can be accessed from the console using a serial port interface or remotely using SSH:
*****************************************************************************************
*
* Dell W-ClearPass Policy Manager 6.0.2.49062
*
*****************************************************************************************
Logged in as group Local Administrator
[appadmin@hyperion.us.arubanetworks.com]#
The following subset of CLI commands may be useful at this point:
To view the Policy Manager data and management port IP address, and DNS configuration:
l
[appadmin]#
To reconfigure DNS or add a new DNS:
l
[appadmin]#
To reconfigure or add management and data ports:
l
[appadmin]#
where:
Dell Networking W-ClearPass Policy Manager 6.0 | Quick Start Guide
show ip
configure dns <primary> [secondary] [tertiary]
configure ip <mgmt | data > <ipadd> netmask <netmask address> gateway <gateway address>
*
*
*
7