Show Physical Disk Channel Statistics - Dell PowerVault MD3000i Cli Manual

Parameters
Parameter
allPhysicalDisks
physicalDiskType
physicalDisk or physicalDisks
summary

Show Physical Disk Channel Statistics

This command shows cumulative physical disk channel data transfer and
error information. If the RAID controller module has automatically degraded
a channel, this command also shows interval statistics. When using this
command, you can display information about one specific physical disk
channel, several physical disk channels, or all physical disk channels.
198
Script Commands
Description
Returns information about all physical disks in
the storage array.
NOTE:
To determine information about the type
and location of all physical disks in the storage
array, use the allPhysicalDisks parameter.
Specifies the type of physical disk for which to
retrieve information. Valid physical disk types are
SAS or SATA.
NOTE:
To determine the information about the SAS
or SATA physical disks in the storage array, use the
physicalDiskType parameter.
Identifies the enclosure and slot where the
physical disk resides. You can enter enclosure IDs
and slot IDs for one or several physical disks.
Enclosure ID values are 0 to 99. Slot ID values
are 0 to 31. You must put parentheses around the
enclosure ID values and the slot ID values.
Returns the status, capacity, data rate, product
ID, and firmware version for the specified
physical disks.
NOTE:
To determine the type of physical disk in a
specific location, use the physicalDisk parameter,
and enter the enclosure and slot IDs for the
physical disk.