Parameter
Parameter
Description
integer
The identifier number of the iSCSI session. Enclose the identifier
number of the iSCSI session in square brackets ([ ]).
Stop Physical Disk Blink
This command turns off the indicator LED on the physical disk that were
turned on by the start physicalDisk blink command.
Syntax
stop physicalDisk blink
Parameters
None.
Stop Snapshot
This command stops a copy-on-write operation.
Syntax
stop snapshot (virtualDisk [ virtualDiskName ] |
virtualDisks [ virtualDiskName1 ...
virtualDiskNamen ]
Parameters
Parameter
virtualDisk or virtualDisks Name of the specific virtual disk for which to stop a copy-
Description
on-write operation. You can enter more than one virtual
disk name. You must put brackets ([ ]) around the virtual
disk names. If the virtual disk names have special
characters, you must also put quotation marks (" ")
around the virtual disk names.
Script Commands
219