Start Disk Group Blink; Start Disk Group Defragment - Dell PowerVault MD3000i Cli Manual

Parameters
Parameter
allVirtualDisks
virtualDisk or
virtualDisks

Start Disk Group Blink

This command identifies the physical disks that are logically grouped
together to form the specified disk group by blinking the indicator LEDs on
the physical disks. (Use the stop diskGroup blink command to turn off the
indicator LEDs on the physical disks.)
Syntax
start diskGroup [ diskGroupNumber ] blink
Parameters
Parameter
diskGroup

Start Disk Group Defragment

This command starts a defragment operation on the specified disk group.
NOTE:
Defragmenting a disk group starts a long-running operation that you cannot
stop.
Syntax
start diskGroup [ diskGroupNumber ] defragment
214
Script Commands
Description
Returns reservation information about all virtual disks in
the storage array.
Name of the specific virtual disk for which you are retrieving
reservation information. You can enter more than one
virtual disk name. You must put brackets ([ ]) around the
virtual disk name. If the virtual disk name has special
characters, you must also put quotation marks (" ") around
the virtual disk name.
Description
Number of the disk group to identify. You must
put brackets ([ ]) around the disk group number.