Dell PowerVault MD3000i Cli Manual page 17

SMcli (-n storage-array-name | -w WWID )
[-c " command ; { command2 };"]
[-o outputfile ][-p password ][-e][-S]
SMcli (-n storage-array-name | -w WWID )
[-f scriptfile ]
[-o outputfile ] [-p password ] [-e] [-S]
SMcli (-n storage-array-name | -w WWID )
[-o outputfile ][-p password ][-e][-S]
SMcli -a email: email-address
[ host-name-or-IP-address1
[ host-name-or-IP-address2 ]]
[-n storage-array-name | -w WWID | -h host-name |
-r ( host_sa | direct_sa )]
[-I information-to-include ][-q frequency ][-S]
SMcli -x email: email-address
[ host-name-or-IP-address1
[ host-name-or-IP-address2 ]]
[-n storage-array-name | -w WWID | -h host-name |
-r ( host_sa | direct_sa )] [-S]
SMcli (-a | -x) trap: community,
host-name-or-IP-address [ host-name-or-IP-address1
[ host-name-or-IP-address2 ]]
[-n storage-array-name | -w WWID | -h host-name |
-r ( host_sa | direct_sa )] [-S]
SMcli -d [-w][-i][-s][-v][-S]
SMcli -m host-name-or-IP-address -F email-address
[-g contactInfoFile ][-S]
SMcli -A [ host-name-or-IP-address
[ host-name-or-IP-address ]] [-S]
SMcli -X (-n storage-array-name | -w WWID |
-h host-name )
SMcli -?
17
About the Command Line Interface