Set Snapshot Virtual Disk - Dell PowerVault MD3000i Cli Manual

Parameter
performanceMonitorInterval
performanceMonitorIterations Specifies the number of samples to capture. Enter
NOTE:
When using this command, you can specify one or more of the parameters.
You do not, however, need to use all of the parameters.

Set Snapshot Virtual Disk

This command defines the properties for a snapshot virtual disk and enables
you to rename a snapshot virtual disk.
Syntax
set (virtualDisk [ virtualDiskName ] |
virtualDisks [ virtualDiskName1 ...
virtualDiskNamen ]) userLabel=
" snapshotVirtualDiskName "
warningThresholdPercent= percentValue
repositoryFullPolicy=(failSourceWrites |
failSnapShot)
180
Script Commands
Description
Specifies how frequently to gather performance
data. Enter an integer value for the polling interval,
in seconds, for which you want to capture data. The
range of values is 3 to 3600 seconds. The default
value is 5 seconds.
NOTE:
The polling interval you specify remains in
effect until you end the session. After you end the
session, the polling interval returns to the default
values.
an integer value. The range of values for samples
captured is 1 to 3600. The default value is 1.
NOTE:
The number of iterations you specify remains
in effect until you end the session. After you end the
session, the number of iterations returns to the default
values.