Dell PowerVault MD3000i Cli Manual page 132

freeCapacityIndexNumber userLabel=
" snapshotVirtualDiskName "
warningThresholdPercent= percentValue
repositoryPercentOfSource= percentValue
repositoryUserLabel=" repositoryName "
repositoryFullPolicy=(failSourceWrites |
failSnapShot) enclosureLossProtect=(TRUE | FALSE)]
Syntax (User-Defined Number of Physical Disks)
create snapshotVirtualDisk sourceVirtualDisk=
" sourceVirtualDiskName " [repositoryRAIDLevel=
0 | 1 | 5 repositoryPhysicalDiskCount=
numberOfPhysicalDisks
physicalDiskType=(SAS | SATA) userLabel=
" snapshotVirtualDiskName "
warningThresholdPercent= percentValue
repositoryPercentOfSource= percentValue
repositoryUserLabel=" repositoryName "
repositoryFullPolicy=(failSourceWrites |
failSnapShot) enclosureLossProtect=(TRUE | FALSE)]
Parameters
Parameter
sourceVirtualDisk
repositoryRAIDLevel
repositoryPhysicalDisks
132
Script Commands
Description
Name of the source virtual disk from
which to take a snapshot. You must put
quotation marks (" ") around the source
virtual disk name.
RAID level for the repository virtual disk.
Valid values are 0, 1, or 5.
Specifies the physical disks to assign to
the repository. Specify the enclosure ID
and slot ID for each physical disk assigned
to the virtual disk. Enclosure ID values
are 0 to 99. Slot ID values are 0 to 31. You
must put parentheses around the list of
repository physical disks.