Save Storage Array Events - Dell PowerVault MD3000i Cli Manual

Parameter
allConfig
globalSettings
virtualDiskConfigAndSe
ttings
hostTopology
lunMappings
NOTE:
When you use this command, you can specify any combination of the
parameters for global setting, virtual disk configuration setting, host topology, or
LUN mapping. To enter all settings, use the allConfig parameter. The parameters are
optional; you do not have to enter any parameters.

Save Storage Array Events

This command saves events from the Major Event Log (MEL) to a file. You
can save either all the events or only the critical events.
Syntax
save storageArray (allEvents | criticalEvents)
file=" filename " [count= numberOfEvents ]
Description
Saves all of the configuration values to the file. (If you
choose this parameter, all of the configuration
parameters are set to TRUE.)
Saves the global settings to the file. To save the global
settings, set this parameter to TRUE. To prevent saving
the global settings, set this parameter to FALSE. The
default value is TRUE.
Saves the virtual disk configuration settings and all of
the global settings to the file. To save the virtual disk
configuration and global settings, set this parameter to
TRUE. To prevent saving the virtual disk configuration
and global settings, set this parameter to FALSE. The
default value is TRUE.
Saves the host topology to the file. To save the host
topology, set this parameter to TRUE. To prevent saving
the host topology, set this parameter to FALSE. The
default value is FALSE.
Saves the LUN mapping to the file. To save the LUN
mapping, set this parameter to TRUE. To prevent
saving the LUN mapping, set this parameter to FALSE.
The default value is FALSE.
Script Commands
163