Dell PowerVault MD3000i Cli Manual page 203

Parameters
Parameter
profile
batteryAge
connections
defaultHostType
healthStatus
hostTypeTable
hotSpareCoverage Displays information about which virtual disks of the storage
features
Description
Displays all properties of the logical and physical components
that comprise the storage array. The information returned takes
several screens to display.
NOTE:
The profile parameter returns detailed information about the
storage array. The information covers several screens on a display.
You might need to increase the size of your display buffer to see all
the information. Because this information is so detailed, you might
want to save the output of this parameter to a file. To save the
output to a file, enter the show storageArray command similar to
the following:
smcli 123.45.67.89 -c "show storagearray
profile;" -o "c:\\folder\\storagearray
profile.txt"
NOTE:
(The previous command syntax is for a host running
Windows. The actual syntax varies depending on your operating
system.)
Displays the status, the age of the battery in days, and the
number of days until the battery needs to be replaced.
Displays a list of the drive channel port locations and the drive
channel connections.
Displays the default host type and host type index.
Displays the health, logical properties, and physical component
properties of the storage array.
Displays a table of all host types known to the RAID controller
module. Each row in the table displays a host type index and the
platform the index represents.
array have hot spare coverage and which virtual disks do not.
Displays a list of the feature identifiers for all enabled features in
the storage array.
Script Commands
203