Download Storage Array Nvsram - Dell PowerVault MD3000i Cli Manual

Parameters
Parameter
NVSRAM
file
NVSRAM-filename
downgrade
activateNow

Download Storage Array NVSRAM

This command downloads NVSRAM values for the storage array RAID
controller module.
Syntax
download storageArray NVSRAM file=" filename "
Description
Specifies that you want to download a file
with NVSRAM values when you
download a firmware file. You must not
put brackets around this parameter.
Include a comma after the term firmware.
File path and name of the file that
contains the firmware. Valid file names
must end with a .dlp extension. You must
put quotation marks (" ") around the file
name.
File path and name of the file that
contains the NVSRAM values. Valid file
names must end with a .dlp extension.
You must put quotation marks (" ")
around the NVSRAM file name. You must
include a comma after the firmware file
name.
Specifies that you are loading firmware
that is a previous version. The default
value is FALSE. Set downgrade to TRUE
if you want to download an earlier version
of firmware.
Activates the firmware and NVSRAM
images. The default value is TRUE. If you
set activateNow to FALSE, you must use
the activate storageArray firmware
command to activate the firmware and
NVSRAM values at a later time.
Script Commands
147