Start Physical Disk Reconstruction; Start Storage Array Blink; Start Virtual Disk Initialization - Dell PowerVault MD3000i Cli Manual

Start Physical Disk Reconstruction

This command starts reconstructing a physical disk.
Syntax
start physicalDisk [ enclosureID,slotID ]
reconstruct
Parameters
Parameter
physicalDisk

Start Storage Array Blink

This command identifies a storage array by turning on the indicator LED for
the storage array. (Use the stop storageArray blink command to turn off the
indicator LED for the storage array.)
Syntax
start storageArray blink
Parameters
None.
Example
-c "start storageArray blink ;"

Start Virtual Disk Initialization

This command starts the formatting of a virtual disk in a storage array.
NOTE:
Initializing a virtual disk is a long-running operation that you cannot stop.
Syntax
start virtualDisk [ virtualDiskName ] initialize
Description
Identifies the enclosure and slot where the physical disk resides.
Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. You
must put brackets ([ ]) around the enclosure ID value and slot
ID value.
Script Commands
217