Script Command Structure - Dell PowerVault MD3000i Cli Manual

Table 2-1. Configuration and Management Operations (continued)
Operation
General storage array
configuration
NVSRAM configuration
Product identification
Battery management
Firmware management

Script Command Structure

All script commands have the following structure:
command operand-data {statement-data}
where command identifies the action to be performed, operand-data
represents the storage array component to configure or manage (such as a
RAID controller module, physical disk, or disk group), and statement-data is
what you want to do to the component (such as, specifying the RAID level or
availability of a disk group).
The general form of the syntax for operand-data is as follows:
( object-type | allobject-types | [ qualifier ]
( object-type [ identifier ] { object-type
[ identifier ]} | object-types [ identifier-list ]))
An operand-data object can be identified four ways:
• The object types and object qualifiers
• The all parameter
30
About the Script Commands
Activities
Resetting a configuration to defaults, labeling,
checking the health status, setting the time of day,
clearing the Major Event Log, and setting the media
scan rate
Downloading and modifying the user configuration
region at the bit and byte level, displaying nonvolatile
static random access memory (NVSRAM) values
Retrieving the enclosure profile display data
Setting the battery installation date
Downloading RAID controller module, enclosure
management module (EMM), and physical disk
firmware