MACROMEDIA DIRECTOR MX 2004-USING DIRECTOR Use Manual page 367

Use these properties to work with the level of detail modifier:
Property
whichModel.lod.auto
whichModel.lod.bias
whichModel.lod.level
Access Description
Get and set
TRUE (1)
automatically reduced based on the
distance from the camera. The fewer
polygons that are drawn, the faster
performance will be. The lod.bias
property controls how aggressively this
takes place.
FALSE (0)
polygon reduction on a per-model basis,
provided you've attached the level of
detail modifier to the model. The level of
detail modifier lets you override the
default settings.
To release level of detail data from
memory once the model has been
streamed in, set the
to
sw3D
Get and set Aggressiveness with which the level of
detail is reduced when in automatic
mode. A value of
and removes all polygons. A value of
100.00
degradation of the geometry. A middle
level can be used to remove polygons at
runtime that were not removed during
authoring.
Get and set The percentage of the model resource
mesh resolution to use when the
automatic mode is
means that polygons are
means that you can control
userData
.
TRUE (1)
is most aggressive
0.0
should result in no visible
.
FALSE (0)
Default
.
TRUE (1)
property
A value
between
0.0
and . The
100.0
default is
100.0
A value
between
0.0
and . The
100.0
default is
100.0
Modifiers
.
.
367