Changing Score Settings - MACROMEDIA DIRECTOR MX 2004-USING DIRECTOR Use Manual

Changing Score settings

To control the appearance of the Score and the information that appears in numbered sprite
channels, you set preferences for the Score. By doing so, you can display a script preview and cast
member information.
To change Score settings:
Select Edit > Preferences > Score.
1
Note: If you are using a Macintosh OS X operating system, select the Director menu, instead of
the Edit menu, to access Preferences.
The Extended display option lets you display information about sprites in the Score. For more
2
information, see
appears in the numbered sprite channels when Extended display is on, select from the following
options:
Name displays sprites by name, if they have names assigned to them.
Cast Member
Behaviors displays the behaviors attached to the sprite.
Ink Mode displays the type of ink applied to the sprite.
Blend
displays the blend percentage applied to the sprite.
Location shows the sprite's x and y screen coordinates.
Change in Location
member in that channel.
To display the first few lines of the selected script in a box at the top of the Score, select
3
Script Preview.
To display the cast member's name and number when the pointer is over a sprite for a few
4
seconds, select Show Data Tips.
You can also change when a sprite span starts in the score (different frames or a marker, perhaps)
by setting it through Edit > Preferences > Sprite. For more information, see
Note: If you are using a Macintosh OS X operating system, select the Director menu, instead of the
Edit menu, to access Preferences.
20 Chapter 2: Score, Stage, and Cast
"Displaying sprite labels in the Score" on page
displays the cast member number, name, or both.
shows the change in x and y coordinates relative to the previous cast
62. To specify what information
"Sprites" on page 51.