MACROMEDIA DIRECTOR MX 2004-USING DIRECTOR Use Manual page 162

Setting transition cast member properties
You use the Property inspector to set values for the transition cast member.
To view or change transition cast member properties:
Select a transition cast member.
1
To display the Property inspector, select Modify > Cast Member > Properties, or select
2
Window > Property Inspector.
If necessary, click the Member tab and display the Graphical mode.
3
The following noneditable settings appear:
The cast member size in kilobytes
The cast member creation and edit dates
The name of the last person who modified the cast member
To view or edit the cast member name, use the Name text box.
4
To add comments about the cast member, use the Comments text box.
5
To specify how Director removes the cast member from memory if memory is low, select one
6
of the following options from the Unload pop-up menu:
3—Normal sets the selected cast members to be removed from memory after any priority 2 cast
members have been removed.
2—Next
sets the selected cast members to be among the first removed from memory.
1—Last
sets the selected cast members to be the last removed from memory.
0—Never
sets the selected cast members to be retained in memory; these cast members are
never unloaded.
If you are using an Xtra transition, click Options to set values that are specific to the Xtra
7
transition. The contents of the Options dialog box is determined by the developer of the Xtra.
Refer to any documentation supplied with the Xtra.
162 Chapter 7: Color, Tempo, and Transitions