MACROMEDIA DIRECTOR MX 2004-USING DIRECTOR Use Manual page 267

The RealMedia tab in the Property inspector
The RealMedia tab in the Property inspector displays the properties of RealMedia cast members.
To set or change the editable properties, you can use the Property inspector or the script
properties for RealMedia. Even if you are not planning to use the script properties, it is a good
idea to read the script entries for the properties that appear in the Property inspector because they
contain valuable information. For more information, see
elements with RealMedia" on page
Two views of the RealMedia tab in the Property inspector
You can work with the following media properties:
•
audio (RealMedia)
or not (
FALSE
realPlayerNativeAudio()
•
soundChannel (RealMedia)
The default setting is Any (0), which means the audio plays in the highest available channel.
This property has no effect if you enable
•
video (RealMedia)
( ) or not (
TRUE
•
pausedAtStart (RealMedia)
automatically when the playhead enters the frame span of the RealMedia cast member or sprite
( ) or not (
FALSE
•
displayRealLogo
to , the RealNetworks logo appears at the beginning of the stream and when the video is
TRUE
stopped or rewound.
272.
specifies whether the audio portion of the RealMedia stream plays (
). The default setting is
is enabled.
specifies the Director sound channel where the RealAudio plays.
specifies whether the video portion of the RealMedia stream appears
). The default setting is
FALSE
specifies whether the RealMedia stream begins to play
). The default setting is
TRUE
specifies whether the RealNetworks logo appears. When this property is set
"Using Lingo or JavaScript syntax sound
. This property has no effect if
TRUE
realPlayerNativeAudio()
.
TRUE
.
FALSE
Using RealMedia content in Director
TRUE
.
267
)