MACROMEDIA DIRECTOR MX 2004-USING DIRECTOR Use Manual page 132

Importing Fireworks files into Director
In Director, you can import flattened images that you have exported from Fireworks, such as
JPEGs, GIFs, and 32-bit PNGs. You can also import Fireworks layers, slices, and interactive
elements by inserting Fireworks HTML.
To import a flattened Fireworks image:
In Director, select File > Import.
1
Navigate to the desired file, and click Import.
2
Change options, if desired, in the Image Options dialog box. For information about each
3
option, see "Choosing import image options" on page
Click OK.
4
The imported graphic appears in the cast as a bitmap.
To import layered, sliced, or interactive Fireworks content:
In Director, select Insert > Fireworks > Images from Fireworks HTML.
1
Note: The location and name of this menu command might be different depending on your version
of Director.
The Open Fireworks HTML dialog box appears.
Locate the Fireworks HTML file you exported for use in Director.
2
Change the following options if desired:
3
Color
lets you specify a color depth for the imported graphics. If the graphics contain
transparency, select 32-bit color.
Registration
Import Rollover Behaviors as Lingo
Import to Score
Click Open.
4
The graphics and code from the Fireworks HTML file are imported.
Note: If you are importing a Fireworks animation, drag keyframes in Director to offset the timing of
each imported layer as necessary.
132 Chapter 5: Bitmaps
lets you set the registration point for the imported graphics.
places cast members into the Score when they're imported.
45.
converts Fireworks behaviors to Lingo code.