MACROMEDIA DIRECTOR MX 2004-USING DIRECTOR Use Manual page 357

Property Name
blendFunction
List[index]
blendFunction
blendFunction
List
blendSource
List[index]
blendSource
List
blendSource
Access Description
Get and set Access to the blending method
associated with a texture layer at the
position indicated by
be a positive integer smaller than or
equal to 8.
Possible values are as follows:
#replace
#multiply
#add
#blend
#alpha
#constant
For detailed information about all of
these options, see the Scripting
Reference topics in the Director Help
Panel.
Get and set Access to the list of blending methods,
#multiply
for the first layer.
Get and set Access to the list of blending methods,
#multiply
for all layers.
Get and set Access to the blending source
associated with a specified layer.
When the
to
#blend
results in the <index>th texture being
combined with the result of the previous
layers for the entire texture using a
single blending ratio. The blending ratio,
in this case, is the value of
blendConstant
example, if the layer at that index
position's
the resultant texture will be 90% of the
texture at that index position and 10%
of the result of the previous texture
layers
Possible values are
#alpha
Get and set Access to the blending sources for each
layer, providing that the blend method is
set to
Possible values are
#alpha
Get and set Access to the blending sources for the
first layer, providing that the blend
method is set to
Possible values are
#alpha
, which must
index
, , , and
#replace #blend
, , , and
#replace #blend
property is set
blendFunction
for the <index>th layer, this
for layer <
index
value is 0.9,
blendConstant
#constant
.
.
#blend
#constant
.
.
#blend
#constant
.
Default
#multiply
#multiply
,
#add
#multiply
,
#add
#constant
>. For
and
#constant
and
#constant
and
Shaders 357