Setting The Date & Date Format - Visonic PowerMaster-10 G2 User Manual

TIME 08:55A
☺

Return to step 2
1
For detailed instructions on how to select User Settings – refer to section B.1 and section B.2.
2
a. The display shows the currently selected format (indicated by a
b. You can now select either the 12 Hrs or 24 Hrs time format using the
3
The display shows the Time in the selected Time Format, for example, "
on the first hour digit "1". The letter that follows the displayed time indicates one of the following:
"A" = AM; "P" = PM and "none" for 24 Hrs time format.
When the curser is positioned on the AM/PM digit, you can set to "AM" with the
"PM" with the
4
You can move the cursor to the next or previous digit using the
5
This setting can be performed only after completing steps 1 – 3 of section B.7A.
6
The time saved is displayed without the cursor, for example, "
format.
7
You can now select another option in the User Settings menu (see section B.1 and section B.2), or quit
programming (see section B.3).
B.8 Setting the Date & Date Format
 Here you can program or adjust the built-in-calendar to show the correct date in the desired date format.
 You can select between a "mm/dd/yyyy" and a "dd/mm/yyyy" date format.
Carefully read the section titled "Additional Information" according to the indicated references

table at end of this section.
A. To Set the Date Format
1.
DATE & FORMAT
DATE MM/DD/YYYY
2.
or
DATE DD/MM/YYYY
3.
7
B. To Set the Date
4.
DATE 20/04/2011
5.
DATE 20/04/2011
☺

Return to step 2
1 For detailed instructions on how to select User Settings – refer to section B.1 and section B.2.
2
The display shows the currently selected format (indicated by a
You can now select either the "MM/DD/YYYY" or "DD/MM/YYYY" date format by pressing
.
3
The display shows the Date and selected Date Format, for example, "
D-303223 PowerMaster-10/30 G2 User's Guide
A "Happy Tune" 
and then reads the selected time format.
Additional Information (section B.7)
button
Enter the [USER SETTINGS] menu and select the [DATE & FORMAT]
option and press
The display shows the currently selected date format.

Click the
format, for example, "DD/MM/YYYY" and press

At the blinking cursor position, enter the correct date, for example,
"20/04/2011", using the numerical keypad.
When you are satisfied with the setting, press
A "Happy Tune" 
step 2 and shows the selected date format.
Additional Information (section B.8)
MENUS AND FUNCTIONS
☺
sounds, the display reads the set time, returns to step 2

symbol), for example, "
08:55 A
" followed by the selected time
1
.
or button until the display reads the desired date
☺
sounds, the display shows the set date and returns to

symbol), for example, "MM/DD/YYYY".
30.12.2007
6, 7
24 Hrs
or buttons.
12:40 PM
", with the cursor blinking
button and the
or buttons.
2
to confirm.
3, 4, 5
to confirm.
6
", with the cursor blinking
".
1 etc – see
or
29