When In Dry Dock; After Dry Docking; Whenever Required - Simrad SH90 - REFERENCE MANUAL REV A Reference Manual

Simrad SH90
188

When in dry dock

Observe the following tasks to be carried out when the vessel
is in dry dock.
Inspect the transducer.
1
2 Clean and remove marine growth.
→ Cleaning the transducer on page 203

After dry docking

Observe the following tasks to be carried out once the vessel has
left the dry dock.
1 Perform a functional test of the hull unit.
→ Docking the vessel on page 201
2 Check the air bleeding system.
→ Air bleeding on page 205

Whenever required

Observe the following tasks to be carried out whenever required.
Lubricate the hull unit.
1
→ Hull unit lubrication on page 206
323775/A