Range - Simrad SH90 - REFERENCE MANUAL REV A Reference Manual

Simrad SH90
150

Range

Dialog description
The parameter dialog opens when you click the
Range
button in the
Horizontal
Horizontal and vertical ranges are normally selected using the
buttons on the Operating Panel. You can also control these
settings directly using this parameter dialog. The available
choices are listed in the dialog.
In addition to the read-out on the menu, the current horizontal
range is normally displayed over the tilt indicator in the upper,
left-hand corner of the display.
For more information about the range settings made on the
Operating Panel, see 'Range' field on page 85.
Range dialog options
• : Click to select manual range.
[Range]
Available ranges are 50, 75, 100, 150, 200, 300, 400, 500,
600, 750, 1000, 1200, 1500 and 2000 meters.
• : Click to enable manual range selection.
Manual
• : Click to enable automatic range selection during
Auto
position- and target tracking. This allows for optimal tracking.
• : Click to close the parameter dialog.
Close
• : Click to access the on-line help.
Help
To maintain a steady display during seine setting, the lower
automatic range is set to 450 meters. Changing the range or
pressing the button will stop the automatic ranging
Manual
function. The sonar is designed to work with various horizontal
range units such as meter, nautical mile, US survey feet or yards.
This choice can be made by pressing the
menu.
Display
Related topics
• Horizontal menu on page 92
• Vertical menu on page 94
• Vertical 180 menu on page 95
• Units on page 172
, and
Vertical Vertical 180
Units
Range
menus.
button in the
323775/A