Edit Gear (Trawl) - Simrad SH90 - REFERENCE MANUAL REV A Reference Manual

323775/A

Edit Gear (Trawl)

Dialog description
The parameter dialog opens when you click the
Gear
on the menu. Each of the available options in the
Setup
dialog can be edited using the
selected, this
Edit Gear
These parameters allows you to monitor or define the distance
and depth of your trawl, as well as the height and width of
your trawl opening. If you use the Simrad ITI system, these
parameters will be provided automatically.
Edit Gear (Trawl) dialog options
• : Click to define the distance to the trawl. The setting
Distance
is automatically if you click the
Simrad trawl system is connected to the sonar. If you click
, you can define the distance in steps of 10 meters.
Manual
• : Click to define the depth of the trawl. The setting is
Depth
made automatically if you click the
a Simrad trawl system is connected to the sonar. If you click
, you can define the depth in steps of 10 meters.
Manual
• : Click to define the height of the trawl opening. The
Height
setting is made automatically if you click the
provided that a Simrad trawl system is connected to the sonar.
If you click
Manual
meter.
• : Click to define the width of the trawl opening. The
Width
setting is made automatically if you click the
provided that a Simrad trawl system is connected to the sonar.
If you click
Manual
meters.
• : Click to define the length of the trawl symbol on
Length
the sonar display.
• : Click to close the parameter dialog.
Close
• : Click to access the on-line help.
Help
Related topics
• Setup menu on page 98
• Gear on page 137
• Edit Gear (Purse) on page 132
button. When a trawl has been
Edit
parameter dialog is provided.
button, provided that a
Auto
Auto
, you can define the height in steps of 1
, you can define the width in steps of 10
Parameters
button
Gear
Gear
button, provided that
button,
Auto
button,
Auto
133