Displaying A Configuration Menu - Cisco 6921 Administration Manual

Configuration Menus on the Cisco Unified IP Phone
•

Displaying a Configuration Menu

To display a configuration menu, perform the following steps.
You can control whether a phone has access to the Settings menu or to options on this menu by using the
Note
Settings Access field in the Cisco Unified CM Administration Phone Configuration window. The
Settings Access field accepts these values:
•
•
•
If you cannot access an option on the Administrator Settings menu, check the Settings Access field.
Procedure
Press the Applications button.
Step 1
Step 2 Select Admin Settings.
Note
Enter the password and then press the Select button. The Admin Settings password is configured in the
Step 3
Local Phone Unlock Password parameter in the Common Phone Profile Configuration on
Cisco Unified CM Administration.
Note
Step 4 Perform one of these actions to display the desired menu:
•
•
To display a submenu repeat
Step 5
To exit a menu, press the Exit softkey.
Step 6
Related Topics
•
•
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP)
4-2
IPv4 Setup Menu Options, page 4-6
Enabled—Allows access to the Settings menu.
Disabled—Prevents access to the Settings menu.
Restricted—Allows access to the User Preferences menu and allows volume changes to be saved.
Prevents access to other options on the Settings menu.
For information about the Status menu, see
Statistics on the Cisco Unified IP Phone."
Chapter 9, "Troubleshooting and Maintenance."
Users can access the Admin Settings without entering a password when the Local Phone Unlock
Password parameter is not configured
Use the navigation bar to select the desired menu and then press the Select button.
Use the keypad on the phone to enter the number that corresponds to the menu.
Step
Unlocking and Locking Options, page 4-3
Editing Values, page 4-3
Chapter 4
Chapter 7, "Viewing Model Information, Status, and
For information about the Reset Settings menu, see
4.
Configuring Settings on the Cisco Unified IP Phone
OL-20851-01