Ntp Configuration Menu For Sip Phones - Cisco IP Phone Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phones
Table 4-12 Locale Configuration Menu Options (continued)
Option Description
Network Locale Version of the network locale loaded on the
Version phone.
NTP Configuration Menu to view information on NTP server and
mode configuration. For more information, see
(SIP Phones only)

NTP Configuration Menu for SIP Phones,

page
NTP Configuration Menu for SIP Phones
The NTP Configuration menu displays information about the NTP server and mode configuration used
by SIP Phones.
Table 4-13 NTP Configuration Menu Options
Option Description
NTP IP Address 1 IP address of the primary NTP server.
NTP IP Address 2 IP address of the secondary or backup NTP
server.
NTP Mode 1 Primary server mode. Supported modes are
Directed Broadcast, Unicast, Multicast, Any cast.
NTP Mode 2 Secondary server mode. Supported modes are
Directed Broadcast, Unicast, Multicast, Any cast.
OL-23091-01
4-25.
Table 4-13 describes the options on this menu.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
To Change
Display only—cannot configure.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
To Change
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
Device Configuration Menu
4-25