Locale Configuration Menu; Ntp Configuration Menu (Sip Phones Only) - Cisco 7975G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Locale Configuration Menu

The Locale Configuration menu displays information about the user locale and the network locale used
by the phone.
Table 4-9 Locale Configuration Menu Options
Option Description
User Locale User locale associated with the phone
user. The user locale identifies a set of
detailed information to support users,
including language, font, date and time
formatting, and alphanumeric keyboard
text information.
User Locale Version of the user locale loaded on the
Version phone.
User Locale Char Character set that the phone uses for the
Set user locale.
Network Locale Network locale associated with the
phone user. The network locale
identifies a set of detailed information
that supports the phone in a specific
location, including definitions of the
tones and cadences used by the phone.
Network Locale Version of the network locale loaded
Version on the phone.
NTP Configuration Provides access to the NTP
(SIP phones only) Configuration Menu. For more
information, see the
Configuration Menu (SIP Phones
Only)" section on page 4-19

NTP Configuration Menu (SIP Phones Only)

The NTP Configuration menu displays information about the NTP server and mode configuration used
by SIP phones.
Table 4-10 NTP Configuration Menu Options
Option Description
NTP Server 1 IP address of the primary NTP server.
NTP Server 2 IP address of the secondary or backup
NTP server.
NTP Mode 1 Primary server mode. Supported modes
are Directed Broadcast and Unicast.
NTP Mode 2 Secondary server mode. Supported
modes are Directed Broadcast and
Unicast.
OL-12642-01
Table 4-9 describes the options on this menu.
"NTP
Table 4-10 describes the options on this menu.
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.0
To Change
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Display only—Cannot configure.
Display only—Cannot configure.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Display only—Cannot configure.
From Cisco Unified Communications
Manager Administration, choose
System > Phone > Phone NTP
Reference.
To Change
Display only—Cannot configure.
Display only—Cannot configure.
Display only—Cannot configure.
Display only—Cannot configure.
Device Configuration Menu
4-19