Product Safety And Security; Safety And Performance Information; Power Outage; External Devices - Cisco 7800 Series User Manual

Product Safety and Security

•
•
•
•

Safety and Performance Information

Power Outage

Your access to emergency service through the phone requires that the phone receive power. If a power
interruption occurs, service or emergency calling service dialing does not function until power is restored. If
a power failure or disruption occurs, you may need to reset or reconfigure the equipment before you can use
service or emergency calling service dialing.

External Devices

We recommend that you use good-quality external devices that are shielded against unwanted radio frequency
(RF) and audio frequency (AF) signals. External devices include headsets, cables, and connectors.
Depending on the quality of these devices and their proximity to other devices, such as mobile phones or
two-way radios, some audio noise may still occur. In these cases, we recommend that you take one or more
of these actions:
• Move the external device away from the source of the RF or AF signals.
• Route the external device cables away from the source of the RF or AF signals.
• Use shielded cables for the external device, or use cables with a better shield and connector.
• Shorten the length of the external device cable.
• Apply ferrites or other such devices on the cables for the external device.
Cisco cannot guarantee the performance of external devices, cables, and connectors.
Safety and Performance Information, on page 97
Compliance Statements, on page 99
Cisco Product Security Overview, on page 101
Important Online Information, on page 101
C H A P T E R
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
8
97