Safety And Performance Information - Cisco 7920 Administration Manual

Chapter 3 Setting Up the Cisco Wireless IP Phone 7920
Table 3-2 Cisco Aironet AP Configuration Tasks (continued)
Activity
Configure radio
(802.11b) settings
Configure Security for
the voice VLAN

Safety and Performance Information

Warning
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Explanation
Data Rate—Allow only 11Mbps
Transmit Power—Use the same setting
as the Cisco Wireless IP Phone 7920
(20mW)
Default Radio Channel—Set a specific
radio channel, do not use "Least
congested channel" option.
Use one of the following types of
security for authentication and
encryption:
Static WEP using either 40-bit or
•
128 bit encryption
LEAP using a RADIUS server.
•
Related Topics
Network Requirements, page 3-2
•
Cisco CallManager Configuration, page 3-2
•
Safety and Performance Information, page 3-5
•
Review the following warnings before installing the Cisco IP Phone. To see
translations of these warnings, refer to the Regulatory Compliance and Safety
Information for the Cisco Wireless IP Phone 7920 document that accompanied
this device.
This warning symbol means danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for
Before You Begin
Reference
Refer to the Wireless 7920 Design
and Deployment Guide
Refer to the Wireless 7920 Design
and Deployment Guide
Security Mechanisms in the
Wireless Network, page 2-6
3-5