Configuring Telephony Features - Cisco 7902G Administration Manual

Cisco unified callmanager 5.0
Hide thumbs Also See for 7902G:
Table of Contents

Advertisement

Chapter 1
An Overview of the Cisco Unified IP Phone

Configuring Telephony Features

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
What Features are Supported on the Cisco Unified IP Phone 7902G, 7905G, and 7912G?
Like other network devices, you must configure the Cisco Unified IP Phones to
prepare them to access Cisco Unified CallManager and the rest of the IP network.
Using DHCP, you have fewer settings to modify, but you can choose to assign a
static IP if your network requires it. For instructions on configuring the network
settings on the Cisco Unified IP Phones, see
Settings on the Cisco Unified IP Phone."
The Cisco Unified IP Phone 7905G and 7912G can integrate with the corporate
Lightweight Directory Access Protocol 3 (LDAP3) standard directory to enable
users to search for co-workers contact information directly from their IP phones.
For information about configuring this feature, see the
Corporate Directory" section on page
Because the Cisco Unified IP Phone is a network device, you can obtain detailed
status information about it. This information can assist you in troubleshooting
problems that users might encounter when using their IP phones. See
"Troubleshooting the Cisco Unified IP Phone"
Related Topics
Configuring Network Settings on the Cisco Unified IP Phone, page 4-1
Configuring Features, Services, and Users, page 5-1
Troubleshooting the Cisco Unified IP Phone, page 7-1
You can modify additional settings on the Cisco Unified IP Phone from the
Cisco Unified CallManager Administration application. Use this web-based
application to set up phone registration criteria and calling search spaces, to
configure corporate directories, and to modify phone button templates, among
other tasks. For more information, see
Services, and Users."
In some places, this manual provides partial instructions for procedures that
involve Cisco Unified CallManager Administration. These instructions are
intended to point you to the appropriate page in the Cisco Unified CallManager
application and to provide some initial guidance.
Chapter 4, "Configuring Network
"Configuring the
5-8.
for tips on using this information.
Chapter 5, "Configuring Features,
Chapter 7,
1-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

7905g7912g

Table of Contents