Using Windows Postscript Driver (Phaser 3200Mfp/N Only); Printer Settings - Xerox Phaser 3200MFP User Manual

6 Printing
Using Windows PostScript Driver

Printer Settings

6-28
PPDs, in combination with the PostScript driver, access printer features and
allow the computer to communicate with the printer. An installation program
for the PPDs is provided on the supplied software CD-ROM.
This chapter includes:
You can use the printer properties window, which allows you to access all of
the printer options you need when using your printer. When the printer
properties are displayed, you can review and change the settings needed for
your print job.
Your printer properties window may differ, depending on your operating
system. This User's Guide shows the Properties window for Windows XP.
Your printer driver Properties window that appears in this User's Guide may
differ depending on the printer in use.
NOTE:
• Most Windows applications will override settings you specify in the printer
driver. Change all print settings available in the software application first,
and change any remaining settings using the printer driver.
• The settings you change remain in effect only while you are using the
current program. To make your changes permanent, make them in the
Printers folder.
• The following procedure is for Windows XP. For other Windows OS, refer
to the corresponding Windows User's Guide or online help.
1) Click the Windows
2) Select Printers and Faxes.
3) Select your printer driver icon.
4) Right-click on the printer driver icon and select
Printing Preferences.
5) Change the settings on each tab, click OK.
Phaser 3200MFP/N
(
button.
Start
Only)
Xerox Phaser 3200MFP